Knife Guard

Make

a

knife guard

with

Paulie

TOOLS NEEDED

TRACE KNIFE BOUNDRIES

CUT ALONG THE OUTER TRACED RECTANGLE

REMOVE THE RECTANGLE PIECE AND
DISCARD THE REST

CUT ALONG THE GUIDE BEING SURE TO
ONLY CUT THROUGH THE TOP LAYER OF THE
CARDBOARD AS SHOWN IN THE CLOSE UP.
THIS WILL HELP THE CARDBOARD FOLD MORE EASILY.
* DON'T CUT ALL THE WAY THROUGH *

FOLD THE FIRST FLAP OVER AND MAKE ANOTHER
GUIDE LINE ABOUT A CENTIMETER FROM THE EDGE.

AGAIN SLICE THROUGH THE TOP LAYER
OF THE CARDBOARD ALONG THIS GUIDE

MAKE ANOTHER GUIDE LINE 1.5 INCHES
FROM THE PREVIOUS ONE

CUT ALL THE WAY THROUGH ALONG THAT LINE.
DISCARD EXCESS

USING A ROLLING PIN OR AN WINE BOTTLE
FLATTEN THE INNER CORRUGATION OF THE CARDBOARD

ON THE RIGHTMOST FLAP, SPREAD GLUE IN THE
PATENTED HUERTA SPIRAL AS SEEN BELOW

FOLD IT ON TOP AND PRESS FIRMLY. IF USING GLUE-ALL, TUCK THE GUARD UNDER SOMETHING HEAVY FOR 12 HOURS BEFORE USING. TO USE IMMEDIATELY, SEAL WITH A GLUE GUN.

CUSTOMIZE OR BOOBYTRAP TO ENSURE YOUR
NEW KNIFE GUARD IS NOT THROWN AWAY

TRACE KNIFE BOUNDRIES

CUT ALONG THE OUTER TRACED RECTANGLE

REMOVE THE RECTANGLE PIECE AND DISCARD THE REST

CUT ALONG THE GUIDE BEING SURE TO ONLY CUT THROUGH THE TOP LAYER OF THE CARDBOARD AS SHOWN IN THE CLOSE-UP. THIS WILL HELP THE CARDBOARD FOLD MORE EASILY.
* DON'T CUT ALL THE WAY THROUGH *

FOLD THE FIRST FLAP OVER AND MAKE ANOTHER GUIDE LINE ABOUT A CENTIMETER FROM THE EDGE.

AGAIN SLICE THROUGH THE TOP LAYER OF THE CARDBOARD ALONG THIS GUIDE

MAKE A FINAL GUIDE LINE 1.5 INCHES FROM THE PREVIOUS INCISION

CUT ALL THE WAY THROUGH ALONG THAT LINE. DISCARD EXCESS

USING A ROLLING PIN OR AN WINE BOTTLE FLATTEN THE INNER CORRUGATION OF THE CARDBOARD

ON THE RIGHTMOST FLAP, SPREAD GLUE IN THE PATENTED HUERTA SPIRAL AS SEEN BELOW

FOLD IT ON TOP AND PRESS FIRMLY. IF USING GLUE-ALL, TUCK THE GUARD UNDER SOMETHING HEAVY FOR 12 HOURS BEFORE USING. TO USE IMMEDIATELY, SEAL WITH A GLUE GUN.

CUSTOMIZE OR BOOBYTRAP TO ENSURE YOUR NEW KNIFE GUARD IS NOT THROWN AWAY

Paulie on a
cardboard knife guard vs a wooden saya:

"It's the difference between a Ferrari and an old Honda. The Ferrari is sexy but too expensive to maintain while the Honda is cheap and comfortable to drive – plus it won't dull your knife by turning it into a baby rattle."

Make

a

knife guard

with

Paulie

TOOLS NEEDED

TRACE KNIFE BOUNDRIES

CUT ALONG THE OUTER TRACED RECTANGLE

REMOVE THE RECTANGLE PIECE AND DISCARD THE REST

CUT ALONG THE GUIDE BEING SURE TOONLY CUT THROUGH THE TOP LAYER OF THECARDBOARD AS SHOWN IN THE CLOSE UP. THIS WILL HELP THE CARDBOARD FOLD MORE EASILY.* DON'T CUT ALL THE WAY THROUGH *

FOLD THE FIRST FLAP OVER AND MAKE ANOTHERGUIDE LINE ABOUT A CENTIMETER FROM THE EDGE.

AGAIN SLICE THROUGH THE TOP LAYEROF THE CARDBOARD ALONG THIS GUIDE

MAKE ANOTHER GUIDE LINE 1.5 INCHESFROM THE PREVIOUS ONE

CUT ALL THE WAY THROUGH ALONG THAT LINE. DISCARD EXCESS

USING A ROLLING PIN OR AN WINE BOTTLEFLATTEN THE INNER CORRUGATION OF THE CARDBOARD

ON THE RIGHTMOST FLAP, SPREAD GLUE IN THEPATENTED HUERTA SPIRAL AS SEEN BELOW

FOLD IT ON TOP AND PRESS FIRMLY. IF USING GLUE-ALL, TUCK THE GUARD UNDER SOMETHING HEAVY FOR 12 HOURS BEFORE USING. TO USE IMMEDIATELY, SEAL WITH A GLUE GUN.

CUSTOMIZE OR BOOBYTRAP TO ENSURE YOURNEW KNIFE GUARD IS NOT THROWN AWAY

TRACE KNIFE BOUNDRIES

CUT ALONG THE OUTER TRACED RECTANGLE

REMOVE THE RECTANGLE PIECE AND DISCARD THE REST

CUT ALONG THE GUIDE BEING SURE TO ONLY CUT THROUGH THE TOP LAYER OF THE CARDBOARD AS SHOWN IN THE CLOSE-UP. THIS WILL HELP THE CARDBOARD FOLD MORE EASILY.* DON'T CUT ALL THE WAY THROUGH *

FOLD THE FIRST FLAP OVER AND MAKE ANOTHER GUIDE LINE ABOUT A CENTIMETER FROM THE EDGE.

AGAIN SLICE THROUGH THE TOP LAYER OF THE CARDBOARD ALONG THIS GUIDE

MAKE A FINAL GUIDE LINE 1.5 INCHES FROM THE PREVIOUS INCISION

CUT ALL THE WAY THROUGH ALONG THAT LINE. DISCARD EXCESS

USING A ROLLING PIN OR AN WINE BOTTLE FLATTEN THE INNER CORRUGATION OF THE CARDBOARD

ON THE RIGHTMOST FLAP, SPREAD GLUE IN THE PATENTED HUERTA SPIRAL AS SEEN BELOW

FOLD IT ON TOP AND PRESS FIRMLY. IF USING GLUE-ALL, TUCK THE GUARD UNDER SOMETHING HEAVY FOR 12 HOURS BEFORE USING. TO USE IMMEDIATELY, SEAL WITH A GLUE GUN.

CUSTOMIZE OR BOOBYTRAP TO ENSURE YOUR NEW KNIFE GUARD IS NOT THROWN AWAY

MENU

Entrees

Dessert

A video game inspired by working in restaurants

Sides

EP. 1

EP. 2

EP. 3

EP. 4

EP. 5

REMOVE THE RECTANGLE PIECE AND
DISCARD THE REST

CUT ALONG THE GUIDE BEING SURE TO
ONLY CUT THROUGH THE TOP LAYER OF THE
CARDBOARD AS SHOWN IN THE CLOSE UP.
THIS WILL HELP THE CARDBOARD FOLD MORE EASILY.
* DON'T CUT ALL THE WAY THROUGH *

FOLD THE FIRST FLAP OVER AND MAKE ANOTHER
GUIDE LINE ABOUT A CENTIMETER FROM THE EDGE.

AGAIN SLICE THROUGH THE TOP LAYER
OF THE CARDBOARD ALONG THIS GUIDE

MAKE ANOTHER GUIDE LINE 1.5 INCHES
FROM THE PREVIOUS ONE

CUT ALL THE WAY THROUGH ALONG THAT LINE.
DISCARD EXCESS

USING A ROLLING PIN OR AN WINE BOTTLE
FLATTEN THE INNER CORRUGATION OF THE CARDBOARD

ON THE RIGHTMOST FLAP, SPREAD GLUE IN THE
PATENTED HUERTA SPIRAL AS SEEN BELOW

CUSTOMIZE OR BOOBYTRAP TO ENSURE YOUR
NEW KNIFE GUARD IS NOT THROWN AWAY

CUT ALONG THE GUIDE BEING SURE TO ONLY CUT THROUGH THE TOP LAYER OF THE CARDBOARD AS SHOWN IN THE CLOSE-UP. THIS WILL HELP THE CARDBOARD FOLD MORE EASILY.
* DON'T CUT ALL THE WAY THROUGH *